Joined
Last Online
Recent Posts
posted in General Discussion read more

Yeah, I thought my Mac had gone berserk but it was a flaky USB cable.

posted in General Discussion read more

OSX problems solved, one of my USB cables appeared to be bad. App & Wireshark work fine now on both Win64 and OSX Yosemite.

posted in Howto read more

@Derek, switched to Windows 8.1 64 bit. Works well!

posted in General Discussion read more

I installed the app & wireshark on Windows 8.1 64 bit laptop (left the OSX platform, too many problems right now). Works well!

posted in Howto read more

I had the same problem and I couldn't upload code anymore. I took out the board from the housing in order to get to the reset button and followed this procedure: https://www.youtube.com/watch?v=plCxXwiUK-w
I uploaded the Blink scetch which is easy to find. After the succesful upload of the Blink scetch I could upload the CBT firmware again.

posted in Howto read more

@Derek I am running it on OSX Yosemite, npm version 2.7.5, node v0.12.2 and I cloned the latest code today. The problem is the node app starts up when I run: node index.js /dev/cu.usbmodem411
and it returns:
Socket bound: /tmp/cbtbus1
Socket bound: /tmp/cbtbus2
Socket bound: /tmp/cbtbus3
Logging enabled on all three busses
But then it exits, without any error message. It should stay running shouldn't it? The cbtbus1-3 files are created in /tmp.
Somehow, there is a problem in my environment :-/ I tried it with a friend on another OSX machine and it ran fine.

posted in Howto read more

Hi Grayda, the path in of the serial device is not the problem. The node.js app runs and creates the pipe /tmp/cbtbus1 correctly. Also, when the path to the serial device is incorrect, the node.js app won't start, which it does. There seems to be some problem with the rights / access but haven't figured out what.

posted in Howto read more

So it has recognized your high speed CAN bus. Did you start the engine when you were logging data?

posted in Howto read more

Yes, I checked the path which is correct and I am not using any other software...

posted in General Discussion read more

Derek, I tried Wireshark on Mac, I need to solve one last thing to get it working I thing, any ideas? My findings are described here:
http://forum.canb.us/discussion/42/where-are-the-apps#latest