LCD display to CBT over bluetooth

Would like to connect a 16x2 LCD display to the CBT over BT to display a few bits of a PID.

Have serial UART LCD and a HC-06 serial/bluetooth adapter which I managed to pair successfully with a phone, but how do I pair with the CBT so I can send data to it? The PIN of the HC-06 is set to 0000 but they never connect.

I'm totally new to bluetooth.

As best as I can tell the HC06 is not BT4 compatible.

And BT4 does not expose a serial port in the same manner previous versions of BT did.


BT4 is totally different than BT3 unfortunately.

Looks like your connection to CANBus Triple was lost, please wait while we try to reconnect.