Is your CANBus Triple resetting for some reason? See here!
  • 0
  • administrators

    I've run into a couple bad USB cables. Chances are some of you may have also received a bad cable with your CBT. If you have trouble try another cable.

    I've got brownout (low voltage) detection enabled on the Atmega for safety. If you like disabling it seems to stop the resets with a faulty USB cable. Just write 0xFF to the Extended fuse to disable BOD, but this requires a JTAG programmer or an Avr ISP.

  • 0
  • Just tried a different cable and that seems to have done the trick, thanks

  • 0
  • Yeah, I thought my Mac had gone berserk but it was a flaky USB cable.

  • 4
    Posts
  • 644
    Views
  • Log in to reply