• 0
  • I looked at the board design and noticed that SCL & SDA are used for Int for the 1st Canbus, and what looks like a mosfet for the BLE. Would be possible to remap those functions to a different port to enable I2C functionality on that port?

  • 0
  • Speaking for myself, I would be very interested in purchasing a unit that exposed the i2c, even if it cost me one canbus -- a "canbus double", if you will. It would be extremely useful for machine control / nmea-2000 (marine canbus).

  • 2
  • 737
  • Log in to reply