Joined
Last Online
Recent Posts
posted in Firmware read more

This is still a issue; got mine today and having a little trouble.

<blockquote>Arduino: 1.6.3 (Mac OS X), Board: "Arduino Leonardo"

CANBusTriple.ino:24:16: error: 'CAN1SELECT' was not declared in this scope
CANBusTriple.ino:24:28: error: 'CAN1RESET' was not declared in this scope
CANBusTriple.ino:25:16: error: 'CAN2SELECT' was not declared in this scope
CANBusTriple.ino:25:28: error: 'CAN2RESET' was not declared in this scope
CANBusTriple.ino:26:16: error: 'CAN3SELECT' was not declared in this scope
CANBusTriple.ino:26:28: error: 'CAN3RESET' was not declared in this scope
In file included from CANBusTriple.ino:29:0:
Settings.h: In static member function 'static void Settings::firstbootSetup()':
Settings.h:203:19: error: 'BOOT_LED' was not declared in this scope
digitalWrite( BOOT_LED, HIGH );
^
In file included from CANBusTriple.ino:30:0:
AutoBaud.h: In static member function 'static int AutoBaud::baudDetect(byte, Stream*)':
AutoBaud.h:24:12: error: 'CAN1INT_D' was not declared in this scope
io = CAN1INT_D;
^
AutoBaud.h:27:12: error: 'CAN2INT_D' was not declared in this scope
io = CAN2INT_D;
^
AutoBaud.h:30:12: error: 'CAN3INT_D' was not declared in this scope
io = CAN3INT_D;
^
In file included from CANBusTriple.ino:31:0:
SerialCommand.h: In member function 'void SerialCommand::bluetooth()':
SerialCommand.h:445:20: error: 'BOOT_LED' was not declared in this scope
digitalWrite(BOOT_LED, HIGH);
^
In file included from CANBusTriple.ino:34:0:
Naptime.h: In member function 'virtual void Naptime::tick()':
Naptime.h:65:19: error: 'BT_SLEEP' was not declared in this scope
digitalWrite( BT_SLEEP, LOW );
^
Naptime.h:80:19: error: 'BOOT_LED' was not declared in this scope
analogWrite(BOOT_LED, fade);
^
Naptime.h:169:19: error: 'BOOT_LED' was not declared in this scope
digitalWrite( BOOT_LED, LOW );
^
CANBusTriple.ino: In function 'void setup()':
CANBusTriple.ino:83:12: error: 'BT_SLEEP' was not declared in this scope
CANBusTriple.ino:90:12: error: 'BOOT_LED' was not declared in this scope
CANBusTriple.ino:93:12: error: 'CAN1INT_D' was not declared in this scope
CANBusTriple.ino:94:12: error: 'CAN2INT_D' was not declared in this scope
CANBusTriple.ino:95:12: error: 'CAN3INT_D' was not declared in this scope
CANBusTriple.ino:96:12: error: 'CAN1RESET' was not declared in this scope
CANBusTriple.ino:97:12: error: 'CAN2RESET' was not declared in this scope
CANBusTriple.ino:98:12: error: 'CAN3RESET' was not declared in this scope
CANBusTriple.ino:99:12: error: 'CAN1SELECT' was not declared in this scope
CANBusTriple.ino:100:12: error: 'CAN2SELECT' was not declared in this scope
CANBusTriple.ino:101:12: error: 'CAN3SELECT' was not declared in this scope
CANBusTriple.ino: In function 'void loop()':
CANBusTriple.ino:170:19: error: 'CAN1INT_D' was not declared in this scope
CANBusTriple.ino:171:19: error: 'CAN2INT_D' was not declared in this scope
CANBusTriple.ino:172:19: error: 'CAN3INT_D' was not declared in this scope
CANBusTriple.ino: In function 'boolean sendMessage(Message, CANBus)':
CANBusTriple.ino:210:17: error: 'BOOT_LED' was not declared in this scope
Error compiling.

This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.
</blockquote>


Looks like your connection to CANBus Triple was lost, please wait while we try to reconnect.