Okay, made some progress today. The problem I had was getting no data from the CANBUS. The connection to the CBT was fine but issuing CMD 03010100000000 returned nothing (well an ACSII ".") I thought it could be CANBUS speed related.
After looking on this page:
There is a part "How the firmware works" were it says:
// Setup CAN Busses
In the current Arduino program it's some kind of subrouting to (i guess) an auto-detect but that's not working for me.
Look for the line: CANBus1.baudConfig(cbt_settings.busCfg.baud);
I replaced it with 500 to get a fixed rate and that got me data from line 1
The next problem to solve is how to save the HEX data. For some reason or another CoolTerm only seems to be saving the ASCII part which is unusable to me.
You get the idea....
Anybody got any tips for me how to save HEX (which I see on the screen) to the file? I tried both Text Editor on my Mac and Notepad on Windows XP but both save the same. Do I need another program to convert this again?
I need the HEX format so I can load it in Excel for comparison.