Last Online
Recent Posts
posted in Hardware and Wiring read more

What is the default wiring the OBDii plug comes setup as? I can see the Pin 6 trace on the board goes to red, but the green wire trace I can't see, I imagine it is on the back of the board. Is it on Pin 14 already? I don't have the board in front of me, but I recall the White wire going to pins 4+5 (GND), can't see the black wire trace, does it go to pin 16?

When I plug the OBDii into my car, it freaks out and I get all sorts of error messages on the Driver's Information Center screen (2008 Pontiac G8 GT). Just need to make sure everything is wired correctly. Error message go away if I disconnect the cable and restart the car.

For reference the G8 OBDii connector is pinned as follows:

Pin 1 - Low Speed LAN (Not planning on monitoring for now)
2+3 - Not used
4+5 - GND
6 - High Speed LAN +
7-13 - Not used
14 - High Speed LAN -
15 - Not Used
16 - Batt Pos. Voltage.

Looks like your connection to CANBus Triple was lost, please wait while we try to reconnect.